AUCK, WAIKATO, NORTHLAND & BOP MANUFACTURERS: GOVERNMENT-BACKED FUNDING YOU MAY BE ELIGIBLE FOR, BUT HAVEN'T HEARD ABOUT!

$1.425 Million in Government Funding to Help Eligible Manufacturers Embrace Smarter Technology, Affordable Automation and Greater Productivity
A government-backed manufacturing programme is already underway, with $1.425 million committed to helping smaller manufacturers improve productivity through affordable digital technology. Yet many eligible businesses may not know the opportunity exists.
If you operate an engineering workshop, fabrication business or manufacturing facility in Auckland or eligible parts of Waikato, Northland or Bay of Plenty, this initiative deserves your attention.
It's called Digital Manufacturing Light (DM Light), and its purpose is surprisingly straightforward: helping manufacturers improve their existing equipment and production processes without necessarily investing in expensive new machinery.
Better still, we found a documented example showing precisely how government co-funding can work.
$1.425 Million Committed — Here's What You Need to Know
In February 2026, the Ministry of Business, Innovation and Employment (MBIE) announced an expansion of Digital Manufacturing Light.
Beginning 1 April 2026, the Government committed up to $475,000 annually over three years, totalling $1.425 million.
Delivered by the University of Auckland, the expanded programme aims to assist at least 180 manufacturers across the participating regions.
The funding supports technical assessments, technology selection, practical implementation and workforce training.
Importantly, this is a co-funded programme, not a direct cash grant. Participating manufacturers contribute towards project costs.
But what does that actually mean financially?
An Actual Funding Example: The Government Pays $2,500, the Manufacturer Pays $2,500
In August 2026, University of Auckland researcher Dr Jan Polzer publicised a specific Digital Manufacturing Light opportunity for South Auckland manufacturers.
The project focused on reducing machinery energy waste and improving production visibility using affordable digital monitoring equipment.
The published financial breakdown was:
Total project value: NZ$5,000
MBIE contribution: NZ$2,500 (50%)
Manufacturer contribution: NZ$2,500 (50%)
The 12-week project included a Raspberry Pi-based monitoring system installed on one machine or process.
Participating businesses would receive live and historical electricity consumption data, analysis of equipment downtime, identification of inefficient operating patterns and recommendations for improvement.
Five hours of technical support from the University of Auckland were included, and the manufacturer retained the monitoring equipment afterwards.
The advertised opportunity targeted South Auckland manufacturers employing fewer than 50 full-time staff.
This 50/50 arrangement applied to that particular project. It is not a confirmed universal funding formula for every Digital Manufacturing Light initiative.
Nevertheless, it gives manufacturers something valuable: a real example of how government funding can reduce the cost of adopting useful technology.
What Other Assistance Could Your Business Receive?
Digital Manufacturing Light focuses on practical improvements rather than technology for its own sake.
Depending on individual circumstances and programme availability, assistance can include digital assessments, technology recommendations, implementation guidance and workforce training.
Potential applications range from machine monitoring and production tracking to quality inspection and targeted automation.
The objective isn't to transform every workshop into a fully automated factory.
Sometimes, improving one process can make a meaningful difference.
And two published New Zealand pilot projects demonstrate what's possible.
Case Study: An Existing Welding Machine Transformed with Affordable Electronics
Spiraweld Stainless Ltd manufactures spiral-welded pipes using specialised equipment.
Its semi-automatic welding process required an operator to continually monitor and manually adjust the machinery.
Rather than replacing a functioning machine, University of Auckland researchers investigated an affordable retrofit.
Their solution incorporated a computer-vision camera, Raspberry Pi controller, stepper motor and touchscreen.
The camera monitored the welding gap while the system automatically adjusted the equipment.
Reported hardware costs were below NZ$1,000, with approximately NZ$5,000 in development costs.
The project improved welding consistency, reduced waste and allowed the operator to perform other tasks while welding continued.
These were research-project costs, not a guaranteed commercial retrofit price.
Nevertheless, the lesson is compelling.
The next major improvement to your machinery might not involve replacing it at all.
Case Study: Automated Quality Inspection for Approximately $2,500
Another University of Auckland pilot, supported by ABB New Zealand, explored affordable automated inspection.
Researchers developed a portable machine-vision system using low-cost materials and 3D-printed components.
The reported total cost was approximately NZ$2,500.
Designed to inspect features on manufactured parts, the system could work alongside existing manual inspection processes.
For smaller manufacturers, this demonstrated how advanced quality-control capabilities might become accessible without purchasing expensive conventional inspection systems.
Naturally, accuracy and suitability must be validated for each application.
But the opportunity to introduce sophisticated technology at a manageable cost is significant.
Why Smaller Manufacturers Should Pay Attention
Many smaller engineering and manufacturing businesses possess excellent technical skills and dependable machinery but lack dedicated automation engineers or software specialists.
Digital Manufacturing Light aims to bridge that gap.
The programme draws on the University of Cambridge's Digital Manufacturing on a Shoestring approach, adapted for local conditions by the University of Auckland.
The philosophy begins with identifying a genuine production problem and investigating an affordable technological solution.
That could mean improving job tracking, understanding equipment downtime, monitoring power consumption or automating repetitive inspection work.
Importantly, digital technology need not replace skilled tradespeople.
It can help them concentrate on more valuable work by reducing repetitive tasks and providing better production information.
For smaller workshops, this could create opportunities to improve productivity without substantially increasing workforce numbers or replacing expensive existing assets.
Why PTA Is Sharing This Opportunity
At PTA Ltd, we believe our responsibility to the engineering and manufacturing industries goes beyond supplying industrial products.
Access to specialist knowledge, innovative solutions and useful industry information can be equally valuable.
Whether that involves finding an unfamiliar product, identifying a better manufacturing process or introducing businesses to opportunities they might otherwise overlook, informed decisions can create genuine commercial value.
Digital Manufacturing Light reflects that philosophy.
We are not programme administrators or funding providers.
We simply believe manufacturers deserve to know when useful opportunities exist.
And this is one worth investigating.
How to Find Out Whether Your Business Qualifies
Manufacturers in Auckland and eligible parts of Waikato, Northland and Bay of Plenty can contact the University of Auckland's Digital Manufacturing Light team.
Email: dmlight@auckland.ac.nz
Ask specifically about geographical eligibility, available projects, company-size requirements, government contributions and the costs your business would need to cover.
The published 50/50 project is a useful example, but current availability and funding terms require direct confirmation.
Further information:
The Bigger Opportunity
The future of manufacturing isn't necessarily about bigger factories, larger workforces or more expensive machinery.
Sometimes, it begins with getting more from the equipment, people and capabilities a business already possesses.
And with government-backed expertise available to eligible manufacturers, the smartest investment might begin with asking one simple question: What could we be doing better?
PTA Ltd — Power Tools & Abrasives
Specialist industrial products, technical knowledge and sourcing expertise for engineering, fabrication and manufacturing businesses throughout New Zealand.






Comments